CL-5X and EF-6Neo Installation Manual

[rbalderasm]

Hi everyone;

I've lost my CL-5X coaxial speakers and EF-6NEO component speakers installation guide. The thing is that I don't remember how to install the in-line cross over (I thing is a capacitor) for the coaxial speaker; as far as I know I may damage the tweeter If I don't install it correctly. Also I have forgotten which is the negative terminal on the tweeters; I'm not sure if it is the white or the gray cable.

Any advice is appreciated.

[David]

the white cable is the positive, and the grey is the negative.

Im not to sure on the crossover, but I will find out for you!

[David]

Hey, Just talked to someone for you. There in-line crossover is already pre-wired up. All you have to do is hook the speaker wire coming from your amp/hu up to the single lead wires coming from the speaker (one pos and one neg)

[rbalderasm]

Thank you very much David for your response.

Forgot to mention that I removed the in-line cross over to use the tweeter from the coaxials on the 480 satnet x-over as a image tweeter...just as an experiment.

So now that I'm convinced that the image tweeter works I purchased the LP-1 and a couple of tewteers and installed them on the front set.

So now Im with a in-line cross over and a pair of tweeters that must be wired up into the coaxial. Next time I'll take a picture fo the instalaltion before doing any experiments.

Thanks again.